Antec Performance 1 FT ARGB Tempered Glass Full Tower E-ATX Case

Antec Performance 1 FT ARGB Tempered Glass Full Tower E-ATX Case - Dimensions: 522 x 230 x 522 mm (DWH) - Form Factor: Full Tower - Motherboard Support: E-ATX, ATX, Micro-ATX, ITX - Side Panel: 4mm Tempered Glass - Expansion Slots: 8 - Drive Bay Support: 2/2 (3.5"/2.5"), 3x 2.5" - Fan Support: 3x 120/140mm Front, 3x 120/140mm Top, 3x 120mm Power Supply Shroud, 1x 120mm Rear - Included Fans: 3x 140mm Tranquil ARGB PWM Fans - Antec Performance 1 FT ARGB

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

Performance 1 FT ARGB

E-ATX HIGHLY COMPATIBLE PC CASE

SYSTEM STATUS WITH A GLANCE

Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Attention: The Antec iUinity software must be installed.

ANTEC iUnity

The Antec iUnity provides instant data on PC specs, loads, and usage.

I/O Panel

- Including the mainstream Type-C(10Gbps) port for high-speed transfer.
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.

4mm Tempered Glass & Perforated Solid Steel

Left panel adopts tempered glass for better PC showcase visual effects.
Right solid panel is bottom-perforated to enhance heat dissipation and ventilation.

Cable Management on Point

Spacious cable management for efficient wire organisation.

There are ten sets of velcro straps for easy cable management.

1 - Three sets of velcro straps for fan & I/O cable routing.
2 - Five velcro straps for hardware and power supply cables.
3 - Two velcro straps at the rear for rear I/O cable routing.

Easy Installation

Removable Top Cooling Bracket.

PRE-INSTALLED

4x TRANQUIL SILENT ARGB FANS

MORE TRANQUIL, MORE AIRFLOW

Unique fan blade and frame design offers powerful airflow with low noise accomplished.

Exquisite craftsmanship

Minimal clearance between fan frame and blades, achieving maximum operational efficiency.

Vibration-Absorbing & Anti-Noise Pads

Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.

Best Airflow Path for GPU Cooling

Airflow-enhancing mesh front panel provides massive air.

Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.

Top: Magnetic dust filter
Front: Magnetic & clip-on dust filter
Bottom: Full-sized pull-out dust filter
Side: Magnetic dust filter

Extensive Interior

- Motherboard support E-ATX (≤ 285 mm), ATX, Micro-ATX, ITX
- CPU cooler max height ≤ 175mm
- GPU max length ≤ 440mm
- Power Supply max length ≤ 245 mm (with HDD)≤ 440 mm (without HDD)

Best Cooling Design

- Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
- Supports 360mm radiators at the front and top simultaneously.
- Up to 10 fans simultaneously.

Modular Drive Trays

Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.